VERFIN-SF- 300(Gloss Agent)

SPECIFICATION
Total Solid at 1050 C
30 ± 1%
 
PH Value
7 ± 1
 
Shelf Life
90 days.
 
Appearance     
White paste
   
DILUTION

VERFIN- SF-300 can be easily diluted in cold water 5Kgs. of VERFIN-SF-300 may be diluted with 5Kgs. of water i.e. 10 liter of solution will be 150 GPL – strength. This concentration can be varied to suit mills convenience.Solution should be passed through a 40 mesh wire cloth while adding

                                                                     
   
APPLICATION

VERFIN-SF-300 finds application for surface coating. It is also used for water – proofing of paper & board articles. Being Non-ionic and stable to alkali, VERFIN-SF-300 is perfectly compatible with coating mixtures based on case in and / or Synthetic lattices such as Butakens. VERFIN-SF-300 imparts luster and slight water resistance to coatings.VERFIN-SF-300 should be added after addition of pigment along with the coating solution. Dosage depends of quality of paper. Normally the consumption of VERFIN-SF-300 is 5% on pigment (for Duplex Board) and 2% on pigment (for quality coated paper) or depends on the required Gloss, SOA (Surface Oil Absorption) & smoothness of paper. It also increases whiteness & improve printability of paper & board.

VERFIN-SF-300 can reduce 25% Ink consumption &

 gives excellent print gloss.
   
PACKING 50 Kgs. HDPE Carboys
   
STORAGE & HANDLING

Storage must be in covered place & avoid direct sunlight, Non toxic